Description
Rail Information
- The standard 12” high rail is welded to two plates on each side.
- Each plate has two pre-punched holes for connection.
- Secured to the post using 4 bolts per rail (12 mm (1/2’’) D x 30 mm (1 3/16’’)).
- Mounted between the inside faces of the posts.
- When properly installed, rated to withstand a 10,000 lb. impact at 4 mph
Material |
Height |
Thickness |
Finish |
Bolts |
ASTM A1011 Corrugated Steel |
12” |
13-GA (5/64”) |
Powder-coated Safety Yellow |
4 bolts (12 mm x 30 mm) |
Rail Length & Weight
Nominal Length |
Exact Length |
Weight |
2′-0″ |
1′-7″ |
14 lbs |
3′-0″ |
2′-7″ |
19 lbs |
4′-0″ |
3′-7″ |
23.5 lbs |
5′-0″ |
4′-7″ |
28.5 lbs |
6′-0″ |
5′-7″ |
33 lbs |
7′-0″ |
6′-7″ |
38 lbs |
8′-0″ |
7′-7″ |
42.5 lbs |
9′-0″ |
8′-7″ |
47.5 lbs |
10′-0″ |
9′-7″ |
52 lbs |
Note: Nominal length is measured center to center of posts.
Post Information:
- 18″ single high post
- Supports 1 panel rail
- Made from 4.75″ x 4.75″ x 1/4″ thick steel
- Posts come in Centred (Standard ), Offset or Corner configurations.
- Each post is welded to a 10” x 10” x 5/8” thick base plate
- Posts are anchored to concrete using (4x) ¾” x 4 ½” wedge anchors
- Powder-coated safety yellow
- When properly installed, rated to withstand a 10,000 lb. impact at 4 mph
- Weight 30.5lbs (includes hardware)

Hardware Kit Information (included):
- Post to concrete connection.
- (8x) 3/4″ x 4-1/4″ (19.1mm x 108mm) grade 8.8 wedge anchors
- Post to rail connection.
- (8x) M12 x 1.75-35mm hex head bolt. Grade 8.8
- (8x) M12 lock washer. Grade 8.8
- (8x) M12 Flat washer. Grade 8.8
- (8x) M12 hole plugs
- Post Cap